| 1. |
- Liu, Ming, 1982-
(författare)
-
Adaptive Computing based on FPGA Run-time Reconfigurability
- 2011
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- In the past two decades, FPGA has been witnessed from its restricted use as glue logic towards real System-on-Chip (SoC) platforms. Profiting from the great development on semiconductor and IC technologies, the programmability of FPGAs enables themselves wide adoption in all kinds of aspects of embedded designs. Modern FPGAs provide the additional capability of being dynamically and partially reconfigured during the system run-time. The run-time reconfigurability enhances FPGA designs from the sole spatial to both spatial and temporal parallelism, providing more design flexibility for advanced system features. Adaptive computing delegates an advanced computing paradigm in which computation tasks and resources are intelligently managed in correspondence with conditional requirements. In this thesis, we investigate adaptive designs on FPGA platforms: We present a comprehensive and practical design framework for adaptive computing based on the FPGA run-time reconfigurability. It concerns several design key issues in different hardware/software layers, specifically hardware architecture, run-time reconfiguration technical support, OS and device drivers, hardware process scheduler, context switching as well as Inter-Process Communications (IPC). Targeting a special application of data acquisition (DAQ) and trigger systems in nuclear and particle physics experiments, we set up the data streaming model and conduct theoretical analysis on the adaptive system. Three application studies are employed to verify the proposed adaptive design framework: The first application demonstrates a peripheral controller adaptable system aiming at general embedded designs. Through dynamically loading/unloading a NOR flash memory controller and an SRAM controller, both flash memory and SRAM accesses may be accomplished with less resource consumption than in traditional static designs. In the second case, two real algorithm processing engines are adaptively time-multiplexed in the same reconfigurable slot for particle recognition computation. Experimental results reveal the reduced on-chip resource requirements, as well as an approximate processing capability of the peer static design. Taking advantage of the FPGA dynamic reconfigurability, we present in the third application a novel on-FPGA interconnection microarchitecture named RouterLess NoC (RL-NoC). RL-NoC employs the novel design concept of Move Logic Not Data (MLND), and significantly distinguishes itself from the existing interconnection architectures such as buses, crossbars or NoCs. It does not rely on routers to deliver packets hop by hop as canonical NoCs do, but buffers data packets in virtual channels and brings various nodes using run-time reconfiguration to produce or consume them. In comparison with canonical packet-switching NoCs, the routerless architecture features lower design complexity, less resource consumption, higher work frequency, more efficient power dissipation as well as comparable or even higher packet delivery efficiency. It is regarded as a promising interconnection approach in some design scenarios on FPGAs, especially for light-weight applications.
|
|
| 2. |
- Lu, Zhonghai
(författare)
-
Design and Analysis of On-Chip Communication for Network-on-Chip Platforms
- 2007
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Due to the interplay between increasing chip capacity and complex applications, System-on-Chip (SoC) development is confronted by severe challenges, such as managing deep submicron effects, scaling communication architectures and bridging the productivity gap. Network-on-Chip (NoC) has been a rapidly developed concept in recent years to tackle the crisis with focus on network-based communication. NoC problems spread in the whole SoC spectrum ranging from specification, design, implementation to validation, from design methodology to tool support. In the thesis, we formulate and address problems in three key NoC areas, namely, on-chip network architectures, NoC network performance analysis, and NoC communication refinement. Quality and cost are major constraints for micro-electronic products, particularly, in high-volume application domains. We have developed a number of techniques to facilitate the design of systems with low area, high and predictable performance. From flit admission and ejection perspective, we investigate the area optimization for a classical wormhole architecture. The proposals are simple but effective. Not only offering unicast services, on-chip networks should also provide effective support for multicast. We suggest a connection-oriented multicasting protocol which can dynamically establish multicast groups with quality-of-service awareness. Based on the concept of a logical network, we develop theorems to guide the construction of contention-free virtual circuits, and employ a back-tracking algorithm to systematically search for feasible solutions. Network performance analysis plays a central role in the design of NoC communication architectures. Within a layered NoC simulation framework, we develop and integrate traffic generation methods in order to simulate network performance and evaluate network architectures. Using these methods, traffic patterns may be adjusted with locality parameters and be configured per pair of tasks. We propose also an algorithm-based analysis method to estimate whether a wormhole-switched network can satisfy the timing constraints of real-time messages. This method is built on traffic assumptions and based on a contention tree model that captures direct and indirect network contentions and concurrent link usage. In addition to NoC platform design, application design targeting such a platform is an open issue. Following the trends in SoC design, we use an abstract and formal specification as a starting point in our design flow. Based on the synchronous model of computation, we propose a top-down communication refinement approach. This approach decouples the tight global synchronization into process local synchronization, and utilizes synchronizers to achieve process synchronization consistency during refinement. Meanwhile, protocol refinement can be incorporated to satisfy design constraints such as reliability and throughput. The thesis summarizes the major research results on the three topics.
|
|
| 3. |
- Naeem, Abdul, 1976-
(författare)
-
Architecture Support and Scalability Analysis of Memory Consistency Models in Network-on-Chip based Systems
- 2013
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The shared memory systems should support parallelization at the computation (multi-core), communication (Network-on-Chip, NoC) and memory architecture levels to exploit the potential performance benefits. These parallel systems supporting shared memory abstraction both in the general purpose and application specific domains are confronting the critical issue of memory consistency. The memory consistency issue arises due to the unconstrained memory operations which leads to the unexpected behavior of shared memory systems. The memory consistency models enforce ordering constraints on the memory operations for the expected behavior of the shared memory systems. The intuitive Sequential Consistency (SC) model enforces strict ordering constraints on the memory operations and does not take advantage of the system optimizations both in the hardware and software. Alternatively, the relaxed memory consistency models relax the ordering constraints on the memory operations and exploit these optimizations to enhance the system performance at the reasonable cost. The purpose of this thesis is twofold. First, the novel architecture supports are provided for the different memory consistency models like: SC, Total Store Ordering (TSO), Partial Store Ordering (PSO), Weak Consistency (WC), Release Consistency (RC) and Protected Release Consistency (PRC) in the NoC-based multi-core (McNoC) systems. The PRC model is proposed as an extension of the RC model which provides additional reordering and relaxation in the memory operations. Second, the scalability analysis of these memory consistency models is performed in the McNoC systems.The architecture supports for these different memory consistency models are provided in the McNoC platforms. Each configurable McNoC platform uses a packet-switched 2-D mesh NoC with deflection routing policy, distributed shared memory (DSM), distributed locks and customized processor interface. The memory consistency models/protocols are implemented in the customized processor interfaces which are developed to integrate the processors with the rest of the system. The realization schemes for the memory consistency models are based on a transaction counter and an an an address ddress ddress ddress ddress ddress ddress stack tacktack-based based based based based based novel approaches.approaches.approaches.approaches. approaches.approaches.approaches.approaches.approaches.approaches. The transaction counter is used in each node of the network to keep track of the outstanding memory operations issued by a processor in the system. The address stack is used in each node of the network to keep track of the addresses of the outstanding memory operations issued by a processor in the system. These hardware structures are used in the processor interface to enforce the required global orders under these different memory consistency models. The realization scheme of the PRC model in addition also uses acquire counter for further classification of the data operations as unprotected and protected operations.The scalability analysis of these different memory consistency models is performed on the basis of different workloads which are developed and mapped on the various sized networks. The scalability study is conducted in the McNoC systems with 1 to 64-cores with various applications using different problem sizes and traffic patterns. The performance metrics like execution time, performance, speedup, overhead and efficiency are evaluated as a function of the network size. The experiments are conducted both with the synthetic and application workloads. The experimental results under different application workloads show that the average execution time under the relaxed memory consistency models decreases relative to the SC model. The specific numbers are highly sensitive to the application and depend on how well it matches to the architectures. This study shows the performance improvement under the relaxed memory consistency models over the SC model that is dependent on the computation-to-communication ratio, traffic patterns, data-to-synchronization ratio and the problem size. The performance improvement of the PRC and RC models over the SC model tends to be higher than 50% as observed in the experiments, when the system is further scaled up.
|
|
| 4. |
- Shaoteng, Liu, 1984-
(författare)
-
New circuit switching techniques in on-chip networks
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Network on Chip (NoC) is proposed as a promising technology to address the communication challenges in deep sub-micron era. NoC brings network-based communication into the on-chip environment and tackles the problems like long wire complexities, bandwidth scaling and so on. After more than a decade's evolution and development, there are many NoC architectures and solutions available. Nevertheless, NoCs can be classi_ed into two categories: packet switched NoC and circuit switched NoC. In this thesis, targeting circuit switched NoC, we present our innovations and considerations on circuit switched NoCs in three areas, namely, connection setup method, time division multiplexing (TDM) technology and spatial division multiplexing (SDM) technology.Connection setup technique deeply inuences the architecture and performance of a circuit switched NoC, since circuit switched NoC requires to set up connections before launching data transfer. We propose a novel parallel probe based method for dynamic distributed connection setup. This setup method on one hand searches all the possible minimal paths in parallel. On the other hand, it also has a mechanism to reduce resource occupation during the path search process by reclaiming redundant paths. With this setup method, connections are more likely to be established because of the exploration on the path diversity.TDM based NoC constitutes a sub-category of circuit switched NoC. We propose a double time-wheel technique to facilitate a probe based connection setup in TDM NoCs. With this technique, path search algorithms used in connection setup are no longer limited to deterministic routing algorithms. Moreover, the hardware cost can be reduced, since setup requests and data flows can co-exist in one network. Apart from the double time-wheel technique for connection setup, we also propose a highway technique that can enhance the slot utilization during data transfer. This technique can accelerate the transfer of a data flow while maintaining the throughput guarantee and the packet order.SDM based NoC constitutes another sub-category of circuit switched NoC. SDM NoC can benefit from high clock frequency and simple synchronization efforts. To better support the dynamic connection setup in SDM NoCs, we design a single cycle allocator for channel allocation inside each router. This allocator can guarantee both strong fairness and maximal matching quality. We also build up a circuit switched NoC, which can support multiple channels and multiple networks, to study different ways of organizing channels and setting up connections. Finally, we make a comparison between circuit switched NoC and packet switched NoC. We show the strengths and weaknesses on each of them by analysis and evaluation.
|
|
